Most Powerful Amplifiers on the Market Period!
The Power T2500-1BDCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1BDCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.
The T2500-1BDCP is based on the legendary T2500-1BD amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1BDCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
Features:
- 24dB/octave crossover
- 1/0 AWG power/ground connectors
- Audiophile grade speaker connections
- Infrasonic filter
- MOSFET power supply
- MOSFET output stage
- RCA pass-thru outputs
- PowerSync - allows 2 amplifiers to be "strapped" together
- MasterSync - allows 1 amplifier to control an array of amplifiers
- 0°/180° Phase Switch
- Blue L.E.D. Simulated VU Signal/Power Meters
Specifications:
- CEA-2006 Compliant
- Number of Channels 1
- Total Power (Sum of Rated Power) 2500 Watts RMS
- Rated Power (RMS Continuous Power) 1500 Watts x 1 @ 4-Ohm, 2500 Watts x 1 @ 2-Ohm, 2500 Watts x 1 @ 1-Ohm/Two amplifiers in bdSYNC: 5000 Watts x 1 @ 2-Ohm
- Dynamic Power (PVC/PowerCube®) 1823 Watts x 1 @ 4-Ohm, 2940 Watts x 1 @ 2-Ohm, 2980 Watts x 1 @ 1-Ohm
- Bridgeable Yes (two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier)
- Frequency Response 20Hz to 250Hz +/-0.5dB
- Input Sensitivity 150 mV to 4 V
- Circuit Topology Class Class BD
- Efficiency (average) 81.9% @ 4-Ohm, 77.7% @ 2-Ohm, 64.5% @ 1-Ohm
- Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0%
- Signal Input 1 RCA pair
- Signal Output 1 RCA pair
- Tone Controls Bass: 0dB to +18dB @ 45Hz
- Crossover Controls Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth, Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz
- Remote Controls Optional Remote PEQ (overrides built-in Punch Bass)
- Visual Indicators Power (Blue LED), Thermal (Red LED), Protect (Yellow LED), Output -00dB to +2dB @ 11 steps (Blue LEDs), Battery 9VDC to 16VDC @ 11 steps (Blue LEDs)
- Power Wire Gauge 1/0 AWG
- Power Input Connector Block
- Speaker Wire Gauge 8 AWG to 16 AWG
- Speaker Output Connector Block
- Cooling Convection
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 300 A
- Average Current Draw (13.8V Music) 175 A
- Max. Current Draw (13.8V Sinewave) 350 A
- Suggested Alternator 200 A
- Dimensions (H x W x D) 2.14 x 8.14 x 21.875 (in)/5.44 x 20.68 x 55.66 (cm)
- Shipping Weight 21.7 lbs. (9.84 Kg.)