Have More Room for Subs!
The PM500X2 is a 500 Watt 2-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
The PM500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
Features:
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade 2-part epoxy coated PCB
- Marine grade stainless steel hardware
Specifications:
- Input Sensitivity 150 mV - 12 V
- Efficiency (average) 73% @ 4-Ohm
- Total Power (Sum of Rated Power) 500 Watts
- Rated Power (RMS Continuous Power) 150 Watts x 2 @ 4-Ohm, 250 Watts x 2 @ 2-Ohm, 500 Watts x 1 @ 4-Ohm Bridged
- Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or, Punch EQ2 Treble: 0dB to +12dB @ 12kHz, Function depends upon LP/AP/HP switch position
- Crossover Controls High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth, Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth, All-Pass: Yes
- Suggested Alternator 75 A
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 80 A
- Max. Current Draw (13.8V Sinewave) 80 A
- Average Current Draw (13.8V Music) 40 A
- Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
- Shipping Weight 12.3 lbs. (5.57 Kg.)
- Dynamic Power (PVC/PowerCube®) 223 Watts x 2 @ 4-Ohms 0° Res, 365 Watts x 2 @ 2-Ohms 0° Res
- Number of Channels 2
- Bridgeable Yes
- CEA-2006 Compliant
- CEA-2006 Power Rating 150W x 2 @ 4Ω, ≤1.0% THD+N
- Power Input Connector Captive C-Clamp
- Power Wire Gauge 4 AWG
- Signal Output Low level: 1 RCA pair
- Signal Input Hi/Low level: 1 RCA pair
- Speaker Output Connector Captive C-Clamp
- Speaker Wire Gauge 8 AWG to 18 AWG
- Heat Sink Type Cast aluminum
- Cooling Convection
- Remote Controls Optional Punch Level Control (PLC2) Ready
- Visual Indicators Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3 / LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
- Circuit Topology Class Class A/B
- Frequency Response 20Hz to 20kHz +/- 1.0dB
- Dimensions (H x W x D) 2.38 x 7.76 x 13.28 (in) 6.05 x 19.71 x 33.73 (cm)