An Electrical Anti-Rotational Locking (E.A.R.L.) terminal is provided for the ground wire. The terminal is designed for 4-gauge wire and requires a large crimping tool to secure. Three screws are included to attach the terminal to your vehicle's metal chassis.
The amp includes two speaker wire to RCA adapters, for connecting the amp to the speaker-level output of a factory radio or aftermarket head unit.
The amplifier features protection circuitry for overheating, DC voltage on the audio output, over- or under-voltage (<9V or >16V), and short circuits. An LED lights red if the amp goes into protection mode.
With it becoming more and more difficult to find spacious locations for amplifier mounting, Infinity Kappa amplifiers have been developed in a small compact form factor to allow more location versatility.
Sometimes, an amp can be as stylish as it is powerful. With anodized aluminum and screwdriver access concealed by a magnetically attached panel, Infinity Kappa amplifiers have a clean, streamlined industrial design.
DBO™ (Dynamic Bass Optimizer)
Kappa amplifiers feature a subsonic filter with variable frequency and Q. For sealed enclosures, set the Frequency Control to 35Hz, and then adjust the Boost Control to your preference. For vented enclosures, set the Frequency Control to 10Hz below the port tuning, then adjust the Boost control to your preference.
What’s in the box
- 1x 2-Channel amplifier
- 2x 30-amp ATO fuses (1 installed)
- 2x Speaker wire-to-RCA adapters
- 1x EARL ground terminal (for 4-gauge wire)
- 3x 1/2" Self tapping screws
- 1x Heat shrink (1-3/16" long)
- 4x 2" Screws
- 1x Owner’s Manual
|Low-Pass Crossover Frequency||32-320 Hz|
|Low-Pass Slope (dB/octave)||12 dB/octave|
|High-Pass Crossover Frequency||32-320 Hz|
|Preamp Outputs||1 pair|