Offers Perfect Balance of Power Output and Compact Design
The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
Features:
- 24dB/octave crossover
- 2/4 channel input switch
- MOSFET power supply
- MOSFET output stage
- 4 Gauge power/ground connectors
- Audiophile grade speaker connections
- RCA pass-thru outputs
Specifications:
- CEA-2006 Compliant
- Number of Channels 4
- Total Power (Sum of Rated Power) 600 Watts RMS
- Rated Power (RMS Continuous Power) 100 Watts x 4 @ 4-Ohm, 150 Watts x 4 @ 2-Ohm, 300 Watts x 2 @ 4-Ohm Bridged, 2-Ohm x 2 Bridged Stable
- Dynamic Power (PVC/PowerCube®) Front Channels 139 Watts x 2 @ 4-Ohms 0° Res, 236 Watts x 2 @ 2-Ohms 0° Res/Rear Channels 140 Watts x 2 @ 4-Ohms 0° Res, 236 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable Yes
- Frequency Response 20Hz to 20kHz +/- 1dB
- Input Sensitivity 150 mV to 4 V
- Circuit Topology Class Class A/B
- Efficiency (average) 70% @ 4-Ohm, 64% @ 2-Ohm
- Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
- Signal Input Front Low level: 1 RCA pair, Rear Low level: 1 RCA pair, Input Switch: 2CH / 4CH
- Signal Output Low Level: 1 RCA pair
- Tone Controls Front Channels - Punch EQ, Treble: 0dB to +12dB @ 12kHz, Bass: 0dB to +18dB @ 45Hz/Rear Channels - Punch EQ, Treble: 0dB to +12dB @ 12kHz, Bass: 0dB to +18dB @ 45Hz
- Crossover Controls Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth, Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth, Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth, Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
- Remote Controls Optional Remote Punch EQ (overrides rear channel built-in Punch EQ)
- Visual Indicators Power, Thermal, Protect
- Power Wire Gauge 4 AWG
- Power Input Connector Block
- Speaker Wire Gauge 8 AWG to 18 AWG
- Speaker Output Connector Screw terminal barrier strip
- Cooling Convection
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 80 A
- Average Current Draw (13.8V Music) 40 A
- Max. Current Draw (13.8V Sinewave) 80 A
- Suggested Alternator 75 A
- Dimensions (H x W x D) 2.14 x 8.14 x 14.91 (in)/5.42 x 20.68 x 37.86 (cm)
- Shipping Weight 12.00 lbs. (5.44 Kg.)