Experience a Cleaner, Louder and More Impressive Sound Than Before
The Power T500-1bdCP is a 500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T500-1bdCP is optimized exclusively for use with subwoofers.
The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.
Features:
- 24dB/octave crossover
- MOSFET power supply
- MOSFET output stage
- 4 Gauge power/ground connectors
- Audiophile grade speaker connections
- RCA pass-thru outputs
- Infrasonic filter
Specifications:
- CEA-2006 Compliant
- Number of Channels 1
- Total Power (Sum of Rated Power) 500 Watts RMS
- Rated Power (RMS Continuous Power) 300 Watts x 1 @ 4-Ohm, 500 Watts x 1 @ 2-Ohm, 500 Watts x 1 @ 1-Ohm
- Dynamic Power (PVC/PowerCube®) 328 Watts x 1 @ 4-Ohms, 537 Watts x 1 @ 2-Ohms, 707 Watts x 1 @ 1-Ohm
- Bridgeable No
- Frequency Response 20Hz to 250Hz +/- 0.5dB
- Input Sensitivity 150 mV to 4 V
- Circuit Topology Class Class BD
- Efficiency (average) 86.2% @ 4-Ohm, 82.3% @ 2-Ohm, 73.4% @ 1-Ohm
- Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0%
- Signal Input Low level: 1 RCA pair
- Signal Output Low Level: 1 RCA pair
- Tone Controls Bass: 0dB to +18dB @ 45Hz
- Crossover Controls Low-Pass (LP): 35-250Hz 24dB/Octave Butterworth, Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
- Remote Controls Optional Remote Punch Bass EQ (overrides built-in Punch Bass EQ)
- Visual Indicators Power/Thermal/Protect
- Power Wire Gauge 4 AWG
- Power Input Connector Block
- Speaker Wire Gauge 8 AWG to 18 AWG
- Speaker Output Connector Screw terminal barrier strip
- Cooling Convection
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 80 A
- Average Current Draw (13.8V Music) 35 A
- Max. Current Draw (13.8V Sinewave) 70 A
- Suggested Alternator 75 A
- Dimensions (H x W x D) 2.14 x 8.14 x 11.41 (in)/5.42 x 20.68 x 28.97 (cm)
- Shipping Weight 13.39 lbs. (6.07 Kg.)