Rockford Fosgate P600X4 Punch 600 Watt 4-Channel Amplifier

Versatile to Power Any Audio System Configuration

The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Features:

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection

Specifications:

• CEA-2006 Compliant
• Number of Channels 4
• Total Power (Sum of Rated Power) 600 Watts
• Rated Power (RMS Continuous Power) 75 Watts x 4 @ 4-Ohm, 150 Watts x 4 @ 2-Ohm, 300 Watts x 2 @ 4-Ohm Bridged
• Bridgeable Yes
• Frequency Response 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity 150 mV - 12 V
• Circuit Topology Class Class A/B
• Efficiency (average) 68% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
• Signal Input Hi/Low level: 2 RCA pair
• Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or, Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz, Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or, Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz, Function depends upon LP/AP/HP switch position
• Crossover Controls Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth, Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth, All-Pass: Yes
• Remote Controls Optional Punch Level Control (PLC2) Ready
• Visual Indicators Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3/LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• Power Wire Gauge 4 AWG
• Power Input Connector Captive C-Clamp
• Speaker Wire Gauge 8 AWG to 18 AWG
• Speaker Output Connector Captive C-Clamp
• Cooling Convection
• Operating Voltage 9 - 16 VDC
• Recommended Fuse (not included) 100 A
• Average Current Draw (13.8V Music) 45 A
• Max. Current Draw (13.8V Sinewave) 90 A
• Suggested Alternator 75 A
• Dimensions (H x W x D) 2.38 x 7.76 x 13.28 (in)/6.05 x 19.71 x 33.73 (cm)
• Shipping Weight 12.8 lbs. (5.80 Kg.)