Rockford Fosgate P300X2 Punch 300 Watt 2-Channel Amplifier

Fill Your Ride with Clean Music

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

Features:

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection

Specifications:

• CEA-2006 Compliant
• Number of Channels 2
• Total Power (Sum of Rated Power) 300 Watts
• Rated Power (RMS Continuous Power) 100 Watts x 2 @ 4-Ohm, 150 Watts x 2 @ 2-Ohm, 300 Watts x 1 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®) 120 Watts x 2 @ 4-Ohms 0° Res, 203 Watts x 2 @ 2-Ohms 0° Res
• Bridgeable Yes
• Frequency Response 20Hz-20kHz
• Input Sensitivity 150 mV - 12 V
• Circuit Topology Class Class A/B
• Efficiency (average) 69% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
• Signal Input Hi/Low Level: 1 RCA Pair
• Signal Output Low Level: 1 RCA Pair
• Tone Controls 0dB to +14dB @ 12.5kHz, 0dB to +18dB @ 45Hz
• Crossover Controls High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth, Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth, All-Pass: Yes
• Remote Controls Optional Punch Level Control (PLC2) Ready
• Visual Indicators Power/Protect/Thermal LED Input Clip LED3, Output Clip LED1,2,3/LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• Power Wire Gauge 8 AWG to 4 AWG
• Power Input Connector Captive C-Clamp
• Speaker Wire Gauge 8 AWG to 18 AWG
• Speaker Output Connector Captive C-Clamp
• Cooling Convection
• Operating Voltage9 - 16 VDC
• Recommended Fuse (not included) 50 A
• Average Current Draw (13.8V Music) 23 A
• Max. Current Draw (13.8V Sinewave) 45 A
• Suggested Alternator 75 A
• Dimensions (H x W x D) 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm)
• Shipping Weight 9.5 lbs. (4.3 Kg.)