Rockford Fosgate P300X1 Punch 300 Watt Full-Range Monoblock Amplifier

Perfect for Use as a Dedicated Subwoofer or Center Channel Amplifier

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

Features:

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection

Specifications:

• CEA-2006 Compliant
• Number of Channels 1
• Total Power (Sum of Rated Power) 300 Watts
• Rated Power (RMS Continuous Power) 200 Watts x 1 @ 4-Ohm, 300 Watts x 1 @ 2-Ohm
• Dynamic Power (PVC/PowerCube®) 260 Watts x 1 @ 4-Ohms 0° Res, 444 Watts x 1 @ 2-Ohms 0° Res
• Bridgeable No
• Frequency Response 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity 150 mV - 12 V
• Circuit Topology Class Class A/B
• Efficiency (average) 74% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
• Signal Input Hi/Low level: 1 RCA pair
• Signal Output Low Level: 1 RCA Pair
• Tone Controls Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or, Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz, Function depends upon LP/AP/HP switch position
• Crossover Controls High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth, Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth, All-Pass: Yes
• Remote Controls Optional Punch Level Control (PLC2) Ready
• Visual Indicators Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3, LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• Power Wire Gauge 8 AWG to 4 AWG
• Power Input Connector Captive C-Clamp
• Speaker Wire Gauge 8 AWG to 18 AWG
• Speaker Output Connector Captive C-Clamp
• Cooling Convection
• Operating Voltage 9 - 16 VDC
• Recommended Fuse (not included) 50 A
• Average Current Draw (13.8V Music) 23 A
• Max. Current Draw (13.8V Sinewave) 45 A
• Suggested Alternator 75 A
• Dimensions (H x W x D) 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm)
• Shipping Weight 9.5 lbs. (4.30 Kg.)