Rockford Fosgate P1000X5 Punch 1,000 Watt Class-BD 5-Channel Amplifier

The One-And-Only Amplifier You Will Need to Run Your Entire System

The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.

The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

Features:

• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Infrasonic filter
• 2/4 channel input switch

Specifications:

• CEA-2006 Compliant
• Number of Channels 5
• Total Power (Sum of Rated Power) 1000 Watts
• Rated Power (RMS Continuous Power) 75 Watts x 4 +, 150 Watts x 1 @ 4-Ohm/125 Watts x 4 +, 300 Watts x 1 @ 2-Ohm/N/A +,
• 500 Watts @ 1-Ohm
• Dynamic Power (PVC/PowerCube®)115 Watts x 4 +, 299 Watts x 1 @ 4-Ohms 0° Res/190 Watts x 4 +, 540 Watts x 1 @ 2-Ohms 0° Res/N/A +, 863 Watts x 1 @ 1-Ohm 0° Res
• Bridgeable Yes (front/rear channels)
• Frequency Response Front/Rear: 20Hz - 20kHz +/-3dB, Sub: 20Hz - 500Hz +/-3dB
• Input Sensitivity 150 mV - 12 V
• Circuit Topology Class Class A/B + Class BD (Sub)
• Efficiency (average) Front/Rear: 66% @ 4-Ohm, Sub Channel: 80% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) <1.0%
• Signal Input Input Switch: Hi/Low level input, Input Switch: 2/4 channel input, Hi/Low Level: 3 RCA Pair, Sub: front/sub input switch
• Tone Controls Sub: 0dB to +18dB @ 45Hz
• Crossover Controls Front: 50Hz - 250Hz High-Pass @ 12dB/Octave, Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave, Sub: 50Hz - 250Hz Low-Pass, Sub: 28Hz infrasonic filter @ 12dB/Octave
• Remote Controls Optional Punch Level Control (PLC2) Ready
• Visual Indicators Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3/LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• Power Wire Gauge 4 AWG
• Power Input Connector Block
• Speaker Wire Gauge 12 AWG
• Speaker Output Connector Block
• Cooling Convection
• Operating Voltage 9 - 16 VDC
• Recommended Fuse (not included) 150 A
• Average Current Draw (13.8V Music) 75 A
• Max. Current Draw (13.8V Sinewave) 150 A
• Suggested Alternator 100 A
• Dimensions (H x W x D) 2.38 x 7.76 x 15.03 (in)/6.05 x 19.71 x 38.18 (cm)
• Shipping Weight 15.3 lbs. (6.93 Kg.)